Comments on: Hacking the Linksys WRT54GL https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/ After eliminating all other possibilities, the one remaining-no matter how unlikely-must be the truth. Sun, 27 Feb 2011 17:26:07 +0000 hourly 1 https://wordpress.org/?v=6.1.6 By: 1H42L https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-353317 Sun, 27 Feb 2011 17:26:07 +0000 http://www.krunk4ever.com/blog/?p=389#comment-353317 I have WRT54GL and pins 16-17 works fine for me, but still i can’t flash it 🙁

]]> By: Bernd https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-313880 Mon, 29 Nov 2010 08:21:45 +0000 http://www.krunk4ever.com/blog/?p=389#comment-313880 In reply to gg.

Thanks for the tutorial. I saw myself building a JTAG cable and pushing bits into debug registers already.

I also have a v1.1 with non-Intel chip, Samsung-something, i guess and Pins 16+17 worked like a charm. I had to have the tftp-command ready, as there seems to be a certain window in time for the bootloader to accept tftp. Also, i flashed the original Linksys firmware first, as the router complained about “Error on server code pattern incorrect” (http://goo.gl/L1ggR)

Now i have OpenWRT 10.3 again and i’m happy 😀

Cheers,
Bernd

]]> By: Braveworm https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-256395 Wed, 09 Jun 2010 05:07:08 +0000 http://www.krunk4ever.com/blog/?p=389#comment-256395 Thanks a lot, best directions ever, had the same problems as you, thanks for the tips. Sure beats a JTAG.

]]> By: gg https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-253977 Thu, 20 May 2010 04:18:01 +0000 http://www.krunk4ever.com/blog/?p=389#comment-253977 In reply to Rebollo.

Hi,
Which flash chip did you have? Mine is non-intel too.
I wanna confirm if 16+17 would work for me before trying it

]]> By: just4funs https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-250026 Mon, 19 Apr 2010 16:16:11 +0000 http://www.krunk4ever.com/blog/?p=389#comment-250026 thanks… it’s work for me.
my wrt54gl worked again…

]]> By: Zer0 https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-233819 Thu, 28 Jan 2010 19:30:16 +0000 http://www.krunk4ever.com/blog/?p=389#comment-233819 Worked for me. Thanks a ton!

]]> By: Andrew Howlett https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-228160 Mon, 14 Dec 2009 01:42:13 +0000 http://www.krunk4ever.com/blog/?p=389#comment-228160 Thanks, this procedure worked well for me.

andrew.

]]> By: Krunk https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-204090 Wed, 27 May 2009 19:50:54 +0000 http://www.krunk4ever.com/blog/?p=389#comment-204090 It really depends if it’s an hardware error or just a bad setting/firmware. Worth a try I’d suppose.

]]> By: kimpuls https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-204024 Wed, 27 May 2009 10:33:59 +0000 http://www.krunk4ever.com/blog/?p=389#comment-204024 Hi, I have WRT54G v2.2,
2 days ago it worked fine, and could set the web admin through http://192.168.1.1, but yesterday it didn’t work at all, it gave “hardware error” while ping 192.168.1.1.

Could your hard reset above works for my WRT54G v2.2. ?

Tks,

Kimpuls

]]> By: Rebollo https://www.krunk4ever.com/blog/2006/03/12/hacking-the-linksys-wrt54gl/comment-page-1/#comment-197859 Tue, 24 Mar 2009 03:18:27 +0000 http://www.krunk4ever.com/blog/?p=389#comment-197859 Hi!, I have a WRT54GL v1.1 with a flash chip that is *not* from Intel. I had to short pins 16+17. It worked as expected then.

]]>